Frigidaire FFBD1821MB Manuel d'utilisateur télécharger pdf (Page 9)

Installation Instructions

STEP 10 SECURE DISHWASHER

TO COUNTERTOP OR CABINET

In this step you will need the 2 Phillips special head

screws set aside prior to Step 1. The dishwasher must

be secured to the countertop or the cabinet sides.

When countertops are made of wood, use Method 1.

When countertops are granite or other materials that

will not accept screws, use Method 2 to secure

dishwsher at the sides.

IMPORTANT : Drive Screws

straight and flush. Protruding screw heads will scratch

the top or sides of the control panel and can interfere

with door closing.

Method 1: Secure dishwasher to Wood Countertop.

• Fasten the dishwasher to the underside of the

countertop with the 2 Phillips special head screws

provided.

Method 2: Secure dishwasher with side-mounting

brackets.

• Remove plug buttons (one on each side).

When step is complete, close dishwasher door and

verify that gap between countertop and top of

dishwasher door is at least 1/2".

• Install screws through the dishwasher side mount

bracket and into the adjacent cabinet on each side.

Reinstall plug buttons.

STEP 11 CONNECT WATER

SUPPLY

Ferrule

90° Elbow

Compression Nut

Hot Water

Supply Line

Connect water supply to 90° elbow.

• Slide compression nut, then ferrule over end of water

line.

• Insert water line into 90° elbow.

• Slide ferrule against elbow and secure with

compression nut.

IMPORTANT – Check to be sure

that door spring does not rub or contact the fill hose or

water supply line. Test by opening and closing the

door. Re-route the lines if a rubbing noise or

interference occurs.

Figure T

Figure S-2

Figure S-1

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Frigidaire FFBD1821MB Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisine Frigidaire FFBD1821MB