Frigidaire FWAC16B3MSGKW Manuel d'utilisateur télécharger pdf (Page 17)

Installation of water inlet hose

Fasten one end of the inlet hose to

the tap (there is arubber sealing

washer insider).

Tightly screw another end of water

inlet hose on water inlet valve (with

rubber seal ring inside).

Adjust the adjustable foot making

the washer be placed stable

Extend when clockwise rotating and

shorten when counterclockwise

rotating.

Slightly incline the washer first and

loosen the adjustable foot knob.

Adjust the adjustable foot so as to

ensure four corners of washer be

steadily contacted with the ground.

Then tighten the adjustable foot knob

and lock it. If the ground is obviously

not flat, correction should be made on

the ground surface, otherwise the

washer barrel will incline and knock

the cabinet.

Connect with power source

Open the water tap

When tightening the clamping nut, evenly apply the force and do not twist the

water inlet valve to avoid breaking of water inlet valve joint.

Water inlet

hose

Clamping

nut

Attention

Preparation before washing

3231

ENG

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Pas de commentaire

Frigidaire FWAC16B3MSGKW Manuel d'utilisateur Page 17